[Windows/macOS] The ScanSnap you want to connect does not appear on the list

Are the ScanSnap and the computer communicating via the network?

Check whether the ScanSnap and the computer are able to communicate via the network by using the PING command. For details about the checking method, refer to [Windows/macOS] Can I check the communication status by using the PING command?.

When they are able to communicate via the network

Proceed to the next check item after "Are the ScanSnap and the computer communicating via the network?".

When they are not able to communicate via the network

Check the following items:

Have you configured any communication authorization settings on the wireless access point?

If the settings are configured in the ways below on the wireless access point, follow the solutions accordingly.

• Communication between wireless devices is disabled (for example, because of a privacy separator function or a port separator function)

  Enable communication between wireless devices on the wireless access point.

• When the SSID broadcast, such as ANY connection, is disabled

  Enable the SSID broadcast on the wireless access point. Otherwise, configure the Wi-Fi settings manually.

• When the protocol filter function is configured

  Configure the protocol on the wireless access point.

• When the stealth function is configured

  Disable the stealth function, and then configure the Wi-Fi settings again using the WPS function. Otherwise, configure the Wi-Fi settings manually.

• When MAC address filtering is configured

  Set the MAC address for the ScanSnap on the wireless access point, and then configure the Wi-Fi settings again.

In addition, the set channel may be used with another wireless access point.

In this case, change the value of the wireless channel on the wireless access point.

For details about the settings of the wireless access point, refer to your wireless access point manual.

Are you using a public wireless LAN service?

In a public wireless LAN environment, the ScanSnap cannot be connected from a computer or a mobile device because the privacy separator function is usually set to enabled.

Use the ScanSnap in Direct Connect mode without a wireless access point.

For details, refer to ScanSnap Help.

 

Is the specified receiving port number used by another application?

If the specified receiving port number is used by another application, ScanSnap Home cannot receive the information that the ScanSnap is turned on.

Change the port number in the following procedure:

1. Display the scan window of ScanSnap Home on the computer.

   • To display the scan window

2. Select [Preferences] in the menu that appears when you click at the top of the scan window to display the preferences window.

3. Select the ScanSnap that you are using from the list of ScanSnap units that is located in [Scanner information] in the [Scanner] tab.

4. Change the port number for [Port number for startup notice] in [Network settings].

If you change the port number for the startup notice, you also need to change the sending port number for the ScanSnap.

1. Press in the home screen on the touch panel of the ScanSnap to display the [Settings] screen.

2. Press to display the [Wi-Fi settings] screen.

3. Press [Port number for startup notice].

4. Change the port number for [Port Number].

Connect the ScanSnap and the computer to the same network, or specify the IP address of the ScanSnap directly.

If the ScanSnap that you want to use and the computer are connected to different networks, the ScanSnap does not appear on the list.

Check that the ScanSnap and the computer are connected to the same network. If the ScanSnap is connected to a different network from the computer, connect it to the same network.

• How to check and change the network that the ScanSnap is connected to

  For details, refer to ScanSnap Help.

• How to check and change the network that the computer is connected to

  Refer to the manual of the computer.

Even if the ScanSnap and a computer are not connected to the same network, you can connect them by specifying the IP address of the ScanSnap directly.

For details about reconnecting the ScanSnap and a computer by specifying the IP Address of the ScanSnap, refer to ScanSnap Help.

Are there network security restrictions?

Contact the network administrator.

Contact your network administrator if IEEE 802.1X authentication is used.

Check the following with your network administrator:

• Whether the Wi-Fi settings are the same as the settings on the authentication server

• Whether the network environment for the authentication server is normal

• Whether the authentication server and the wireless access point are connected correctly

• Whether the certificate is valid

  Example: Whether the certificate has not been revoked or has not been expired

• Whether the CN (CommonName) for the certificate is within 64 bytes if [EAP-TLS] is selected for the authentication method.